logo

CuriousTab

CuriousTab

Discussion

Home ‣ Digital Electronics ‣ The 8051 Microcontroller Comments
  • Question

  • The 8051 has ________ 16-bit counter/timers.


  • Options
  • A. 1
  • B. 2
  • C. 3
  • D. 4

  • Correct Answer
  • 2 

    • The 8051 Microcontroller problems

    Search Results

    • 1. An alternate function of port pin P3.4 in the 8051 is:

    • Options
    • A. Timer 0
    • B. Timer 1
    • C. interrupt 0
    • D. interrupt 1
      • Discuss
    • 2. Microcontrollers often have:

    • Options
    • A. CPUs
    • B. RAM
    • C. ROM
    • D. all of the above
      • Discuss
    • 3. Both registers TL0 and TL1 are needed to start Timer 0.

    • Options
    • A. True
    • B. False
      • Discuss
    • 4. When the 8051 is reset and the line is HIGH, the program counter points to the first program instruction in the:

    • Options
    • A. internal code memory
    • B. external code memory
    • C. internal data memory
    • D. external data memory
      • Discuss
    • 5. The special function registers are maintained in the next 128 locations after the general-purpose data storage and stack.

    • Options
    • A. True
    • B. False
      • Discuss
    • 6. The total external data memory that can be interfaced to the 8051 is:

    • Options
    • A. 32K
    • B. 64K
    • C. 128K
    • D. 256K
      • Discuss
    • 7. What is the difference between the 8031 and the 8051?

    • Options
    • A. The 8031 has no interrupts.
    • B. The 8031 is ROM-less.
    • C. The 8051 is ROM-less.
    • D. The 8051 has 64 bytes more memory.
      • Discuss
    • 8. Which of the following commands will move the value at port 3 to register 2?

    • Options
    • A. MOV P2, R3
    • B. MOV R3, P2
    • C. MOV 3P, R2
    • D. MOV R2, P3
      • Discuss
    • 9. The number of data registers is:

    • Options
    • A. 8
    • B. 16
    • C. 32
    • D. 64
      • Discuss
    • 10. The following program will receive data from port 1, determine whether bit 2 is high, and then send the number FFH to port 3:
      READ: MOV A,P1
      ANL A,#2H
      CJNE A,#02H,READ
      MOV P3,#FFH

    • Options
    • A. True
    • B. False
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.