What type of DAC is shown below? binary-weighted R-2R ladder

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Digital Electronics ‣ Interfacing to the Analog World Comments

Question
What type of DAC is shown below?
Options
A. binary-weighted
B. R-2R ladder

Correct Answer

R-2R ladder

Interfacing to the Analog World problems

Search Results

1. Describe offset error for a DAC.
Options
A. missing codes
B. error in the slope of the output staircase waveform
C. more or less input voltage is required for the first step than what is specified

2. What function is performed by the block labeled X in the given figure?
Options
A. Analog-to-digital conversion
B. Digital-to-analog conversion
C. Audio ON/OFF control
D. Power supply for the audio amplifier

4. What is the linearity of a D/A converter?
Options
A. It is the reciprocal of the number of discrete steps in the D/A output.
B. It is the comparison between the actual output of the converter and its expected output.
C. It is the converter's ability to resolve between forward and reverse steps when sequenced over its entire range of inputs.
D. It is the deviation between the ideal straight-line output and the actual output of the converter.

6. Which of the following characterizes an analog quantity?
Options
A. Discrete levels represent changes in a quantity.
B. Its values follow a logarithmic curve.
C. It can be described with a finite number of steps.
D. It has a continuous set of values over a given range.

7. When comparing the conversions from digital-to-analog and analog-to-digital, the A/D conversion is generally:
Options
A. less complicated but more time consuming than the D/A conversion.
B. more complicated and more time consuming than the D/A conversion.
C. less complicated and less time consuming than the D/A conversion.
D. more complicated but less time consuming than the D/A conversion.

9. The primary disadvantage of the simultaneous A/D converter is:
Options
A. that it requires the input voltage to be applied to the inputs simultaneously
B. the long conversion time required
C. the large number of output lines required to simultaneously decode the input voltage
D. the large number of comparators required to represent a reasonable sized binary number

Comments

More in Digital Electronics: