logo

CuriousTab

CuriousTab

Discussion


Home Computer Science Electronic Principles Comments

  • Question
  • If a load resistance is 1 kW, a stiff current source has a resistance of


  • Options
  • A. At least 10 Ohm
  • B. Less than 10 Ohm
  • C. More than 100 k Ohm
  • D. Less than 100 k Ohm
  • E. None of the above

  • Correct Answer
  • More than 100 k Ohm 


  • Electronic Principles problems


    Search Results


    • 1. What is the phase shift between total current and voltage in the circuit of a 100 ohm resistor connected in parallel with a capacitor that has a reactance of 100 ohm

    • Options
    • A. 180 degree
    • B. 30 degree
    • C. 45 degree
    • D. 75 degree
    • E. None of the above
    • Discuss
    • 2. Doubling the number of turns of wire in an inductor:

    • Options
    • A. reduces the value of inductance by one-half
    • B. multiplies the value of inductance by two
    • C. multiplies the value of inductance by four
    • D. reduces the value of inductance by one-fourth
    • E. None of the above
    • Discuss
    • 3. The equivalent of 1 micro A is:

    • Options
    • A. 10000A
    • B. 1000 A
    • C. one-millionth of an ampere
    • D. one million amperes
    • E. None of the above
    • Discuss
    • 4. A farad is defined as the amount of capacitance necessary for:

    • Options
    • A. dissipating 1 W of power
    • B. causing an ac phase shift greater than 90 degree
    • C. storing 1 V for 1 second
    • D. changing the voltage on the plates at the rate of 1 V per second when 1 A of current is flowing
    • E. None of the above
    • Discuss
    • 5. What form of energy is used to maintain an imbalance of charges between the terminals of a battery?

    • Options
    • A. Electronical energy
    • B. Mechanical energy
    • C. Chemical energy
    • D. Solar energy
    • E. None of the above
    • Discuss
    • 6. For a pure capacitor:

    • Options
    • A. ac current and voltage are exactly in phase
    • B. ac current leads the voltage by 90 degree
    • C. ac current is converted to dc voltage
    • D. ac current lags the voltage by 90 degree
    • E. None of the above
    • Discuss
    • 7. Doubling the operating voltage of a purely capacitive circuit:

    • Options
    • A. has no effect on the capacitive reactance
    • B. doubles the amount of capacitive reactance
    • C. multiplies the capacitive reactance by 7
    • D. cuts the capacitive reactance in half
    • E. None of the above
    • Discuss
    • 8. A certain power transformer has a turns ratio of 5. What voltage can you expect at the secondary winding when you apply 120 V to the primary winding?

    • Options
    • A. 4.73
    • B. 0.4 V
    • C. 24 V
    • D. 600 V
    • E. None of the above
    • Discuss
    • 9. The component that forms the electrical connection between the rotating coil of wire in a motor and the external source of electrical energy is called the:

    • Options
    • A. rotor
    • B. armature
    • C. battery
    • D. commutator
    • E. None of the above
    • Discuss
    • 10. Holes are the minority carriers in which type of semiconductor?

    • Options
    • A. Extrinsic
    • B. Intrinsic
    • C. n-type
    • D. p-type
    • E. None of the above
    • Discuss


    Comments

    There are no comments.

Enter a new Comment