Discussion
Home ‣ Electrical Engineering ‣ Parallel Circuits See What Others Are Saying!
- Question
An ammeter has an internal resistance of 50 Ω. The meter movement itself can handle up to 1 mA. If 10 mA is applied to the meter, the shunt resistor, RSH1, is approximately
Options- A. 55 Ω
- B. 5.5 Ω
- C. 50 Ω
- D. 9 Ω
- Correct Answer
- 5.5 Ω
- 1. The current through a 120 mH coil is changing at a rate of 150 mA/s. The voltage induced across the coil is
Options- A. 1.8 mV
- B. 18 mV
- C. 180 mV
- D. 1.25 mV Discuss
- 2. A Wheatstone bridge consists of four resistors in parallel.
Options- A. True
- B. False Discuss
- 3. A resistor normally opens when it burns out.
Options- A. True
- B. False Discuss
- 4. The branch current method is based on Kirchhoff's voltage law and Kirchhoff's current law.
Options- A. True
- B. False Discuss
- 5. The watt is the unit of power.
Options- A. True
- B. False Discuss
- 6. In an RL low-pass filter, the output voltage is taken across the inductor and the output lags the input.
Options- A. True
- B. False Discuss
- 7. Find I1. 4I1 + 4I2 = 2
6I1 + 7I2 = 4
Options- A. 0.5 A
- B. 50 mA
- C. ?0.5 A
- D. ?50 mA Discuss
- 8. A sinusoidal current has an rms value of 14 mA. The peak-to-peak value is
Options- A. 45.12 mA
- B. 16 mA
- C. 39.6 mA
- D. 22.6 mA Discuss
- 9. The ability of a material to remain magnetized after removal of the magnetizing force is known as
Options- A. permeability
- B. reluctance
- C. hysteresis
- D. retentivity Discuss
- 10. If the rms current through a 6.8 kΩ resistor is 8 mA, the rms voltage drop across the resistor is
Options- A. 5.44 V
- B. 54.4 V
- C. 7.07 V
- D. 8 V Discuss
More questions
Correct Answer: 18 mV
Correct Answer: False
Correct Answer: True
Correct Answer: True
Correct Answer: True
Correct Answer: False
Correct Answer: ?0.5 A
Correct Answer: 39.6 mA
Correct Answer: retentivity
Correct Answer: 54.4 V
Comments
There are no comments.More in Electrical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.