Home » Electrical Engineering » Parallel Circuits

The following resistors are in parallel across a voltage source: 220 Ω, 470 Ω, and 560 Ω. The resistor with the least current is

220 Ω
470 Ω
560 Ω
impossible to determine without knowing the voltage

Correct Answer: 560 Ω

← Previous Question Next Question→

More Questions from Parallel Circuits

The total resistance of a parallel circuit is 50 Ω. If the total current is 120 mA, the current through the 270 Ω resistor that makes up part of the parallel circuit is approximately
A set of Christmas tree lights is connected in parallel across a 110 V source. The filament of each light bulb is 1.8 kΩ. The current through each bulb is approximately
Four 8 Ω speakers are connected in parallel to the output of an audio amplifier. If the maximum voltage to the speakers is 12 V, the amplifier must be able to deliver to the speakers
Four resistors of equal value are connected in parallel. If the total voltage is 15 V and the total resistance is 600 Ω, the current through each parallel resistor is
A sudden increase in the total current into a parallel circuit may indicate
Four resistors are connected in parallel. Fifteen mA flows through resistor R. If the second resistor is 2R, the third resistor 3R, and the fourth resistor 4R, the total current in the circuit is
There is a total of 800 mA of current into four parallel resistors. The currents through three of the resistors are 40 mA, 70 mA, and 200 mA. The current through the fourth resistor is
The power dissipation in each of four parallel branches is 1.2 W. The total power dissipation is
Four equal-value resistors are connected in parallel. Ten volts are applied across the parallel circuit and 2 mA are measured from the source. The value of each resistor is
If one of the resistors in a parallel circuit is removed, the total resistance

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion