Integrated injection logic offers high component density and is easier to fabricate than TTL.

More Questions from Integrated-Circuit Logic Families

• The noise immunity of a logic circuit refers to the circuit's ability to tolerate noise by causing spurious charges in the output voltage.
• A current-sourcing transistor may also be referred to as a pull-down transistor.
• An unused input of a NAND gate can be left unconnected, pulled high by a pull-up resistor and tied together with another input and not change the logic output.
• The major advantage of CMOS logic circuits over TTL is very low power consumption.
• The abbreviated designator for a HIGH input voltage is VIH.
• CMOS stands for "complementary metal-oxide semiconductors" and the FETs are normally enhancement mode devices.
• The TTL HIGH level source current is higher than the LOW level sinking current.
• Usually P-MOS and N-MOS circuits are identical with the exception of the voltage polarities.
• The time it takes for a square wave to go from 10% to 90% of its voltage level is called propagation delay.
• A common means for measuring and comparing the overall performance of an IC family is the speed-power product.

Discussion & Comments