Terrazzo flooring procedure: identify the incorrect step among the following commonly specified operations for laying a terrazzo floor.
-
Aafter final grinding is over, oxalic acid mixed with water is spread and rubbed hard with soft material
-
Ba base course is prepared as in cement concrete flooring
-
Cglass (brass) divider strips are driven into the topping layer according to the required panel pattern
-
Da 32 mm thick layer of 1:2:4 cement concrete is laid as the terrazzo topping and trowelled smooth
-
Enone of these
Answer
Correct Answer: a 32 mm thick layer of 1:2:4 cement concrete is laid as the terrazzo topping and trowelled smooth
Explanation
Introduction / Context:Terrazzo is a decorative, durable flooring made by embedding marble or stone chips in a rich cement matrix and finishing by grinding and polishing. A correct step sequence ensures bond, flatness, and appearance. This question asks you to spot the incorrect step among typical specifications.
Given Data / Assumptions:
- Traditional in-situ terrazzo over a concrete base.
- Use of divider (glass/brass/aluminium) strips to control cracking and create panels/patterns.
- Final grinding and polishing with oxalic acid slurry is standard in legacy specs.
Concept / Approach:The terrazzo topping is not ordinary 1:2:4 concrete. It is a rich terrazzo mix (often 1:2 by volume cement to marble chips with pigments) of about 12–20 mm thickness laid over a base concrete layer (for example, 1:2:4 or 1:3:6) that provides support. Divider strips are set before the topping stiffens, and grinding/polishing reveal the chips.
Step-by-Step Solution:Base course: correct—similar to cement concrete flooring base.Topping composition: should be terrazzo mix with marble chips, not plain 1:2:4 concrete, and usually much thinner than 32 mm.Divider strips: correctly installed to form panels/patterns and control shrinkage cracks.Final finishing: oxalic acid rubbing/polishing is a recognized traditional step.Therefore, the incorrect step is describing the topping as a 32 mm thick 1:2:4 plain concrete layer.
Verification / Alternative check:Standard BOQ items specify terrazzo topping 12–20 mm (varies) with marble chips; thicknesses like 32 mm are atypical for topping and mischaracterize the mix.
Why Other Options Are Wrong:
- Base preparation, divider strips, and oxalic polishing are all standard steps.
- “None of these” is incorrect because one statement is indeed wrong.
Common Pitfalls:
- Confusing base concrete with the terrazzo topping mix.
- Skipping divider strips, leading to random cracking.
Final Answer:a 32 mm thick layer of 1:2:4 cement concrete is laid as the terrazzo topping and trowelled smooth