Curioustab

Home » Civil Engineering » Waste Water Engineering

The spacing of man holes along a straight portion of a sewer is 300 m, the diameter of the sewer may be

0.9 cm
1.2 m
1.5 m
> 1.5 m.

Correct Answer: > 1.5 m.

← Previous Question Next Question→

More Questions from Waste Water Engineering

The grit and silt of the grit chambers, may not be used for
The settling velocity of a spherical particle of diameter less than 0.1 mm as per Stock's law, is
In areas where light rains are uniformly distributed throughout the year, the type of sewerage system to be adopted is
The intensity of rain is expressed in
The rate of accumulation of sludge per person per year, is
The formula used for determining flow velocities in sewers, is known as
The most efficient cross section of sewers in a separate sewerage system is
If a 2% solution of sewage sample is incubated for 5 days at 20°C and the dissolved oxygen depletion was found to be 8 mg/l. The BOD of the sewage is
The formula which accepts the value of rugosity coefficient n = 0.012 to be used in Manning's formula, is given by
Pick up the incorrect statement from the following for allowing workers to enter sewers

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion