Curioustab

Home » Civil Engineering » Waste Water Engineering

In sewers the velocity of flow should not be

more than the self-cleansing velocity
less than the self-cleansing velocity
less than 10 m/sec
more than 20 m/sec.

Correct Answer: less than the self-cleansing velocity

← Previous Question Next Question→

More Questions from Waste Water Engineering

Traps
Assertion (A) : A free board of 0.3 m is provided above the top sewage line in septic tanks. Reason (R) : It helps to accommodate the scum in the septic tank.
If D is the diameter of a circular sewer and D' is the top horizontal diameter of an equivalent egg shaped section, the relationship which holds good, is
The reduced levels of the string at the consecutive sight rails A and B are 203.575 m, 203.475 m respectively. If the difference of their R.D.s is 10 m, the gradient of the sewer line is
The maximum depth of sedimentation tanks, is kept
The detention time (t) of a settling tank, may be defined as the time required for
The most effective arrangement for diverting excess storm water into a natural drainage, is
For estimating the peak run off the rational formula Q = 0.0278 KpA was evolved by
Pick up the correct statement from the following :
The sewage discharge in a detritus tank of a treatment plant is 576 litres/sec with flow velocity of 0.2 m/sec. If the ratio of width to depth is 2, the depth is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion