Curioustab

Home » Civil Engineering » Tunnelling

For B.G. single track, the section of the tunnel must have a width

4.2 m to 4.5 m
4.5 m to 4.8 m
4.9 m to 5.5 m
5.5 m to 5.8 m

Correct Answer: 4.9 m to 5.5 m

← Previous Question Next Question→

More Questions from Tunnelling

An overhead track on a large truss frame is required in case of car changer by
For B.G. single track railway, the height of the tunnel above top of rails should be
For transferring the tunnel alignment through shafts, we adopt the following steps : 1. Hanging two or more plumb lines in the shaft 2. Determining the bearing of the plumb lines i.e. plumb plane 3. Suspending a 35 kg weight by each plumb line 4. Immersing the weights of both the plumb lines in the buckets containing water. The correct sequence of steps is :
For initial surveys of tunnels, the following activities are involved: 1. Marking portal point with concrete pillars on the ground 2. Marking tunnel obligatory points on the topographical maps 3. Preliminary setting of the tunnel on the topographical Survey of India maps 3. Driving lines between the fixed obligatory points. The correct sequence of the activities is :
Pick up the mechanical ventilation method used for tunnels from the following:
In the wooded bulk-head, used for mucking in steep grade tunnels,
Concrete lining is provided concurrently with the driving operation in case of
Pick up the correct statement from the following during tunnel excavation,
The following tunnels were constructed in different countries for different purposes : 1. Emperor Claudius built the first Roman tunnel 2. The first highway tunnel was constructed in Hungary 3. The first underground railway tunnel was constructed in Great Britain 4. The first navigational tunnel was constructed in France. The correct chronological development of these tunnels is:
Forepoling method is generally adopted for tunnelling in :

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion