Curioustab

Home » Civil Engineering » Theory of Structures

Stress may be expressed in Newtons

per millimetre square (N/mm2)
per centimetre square (N/cm2)
per metre square (N/m2)
none of these.

Correct Answer: per millimetre square (N/mm2)

← Previous Question Next Question→

More Questions from Theory of Structures

Pick up the correct statement from the following:
The force in AD of the truss shown in given figure, is
The radius of gyration of a section of area A and least moment of inertia I about the centroidal axis, is
A simply supported beam carries varying load from zero at one end and w at the other end. If the length of the beam is a, the maximum bending moment will be
There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be in the ratio of
If E, N, K and 1/m are modulus of elasticity, modulus of rigidity. Bulk modulus and Poisson ratio of the material, the following relationship holds good
Two bars, one of steel and the other of copper having areas of cross-sections As and Ac, coefficient of expansion αs and αc and Young's Modulii Es and Es are rigidly connected together at the ends and subjected to temperature change of t°. If the length of the bars initially is L, the final extension δ of the two bars at t° temperature is given by
Stress may be defined as
Pick up the correct statement from the following:
The shape factor of standard rolled beam section varies from

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion