Curioustab

Home » Civil Engineering » Theory of Structures

A simply supported beam carries varying load from zero at one end and w at the other end. If the length of the beam is a, the maximum bending moment will be

Correct Answer:

← Previous Question Next Question→

More Questions from Theory of Structures

There are two hinged semicircular arches A, B and C of radii 5 m, 7.5 m and 10 m respectively and each carries a concentrated load W at their crowns. The horizontal thrust at their supports will be in the ratio of
If E, N, K and 1/m are modulus of elasticity, modulus of rigidity. Bulk modulus and Poisson ratio of the material, the following relationship holds good
Two bars, one of steel and the other of copper having areas of cross-sections As and Ac, coefficient of expansion αs and αc and Young's Modulii Es and Es are rigidly connected together at the ends and subjected to temperature change of t°. If the length of the bars initially is L, the final extension δ of the two bars at t° temperature is given by
Stress may be defined as
Pick up the correct statement from the following:
The shape factor of standard rolled beam section varies from
The tangential component of stress on an plane inclined θ° to the direction of the force, may be obtained by multiplying the normal stress by
The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at the neutral axis, is
A truss containing j joints and m members, will be a simple truss if
A load of 1960 N is raised at the end of a steel wire. The minimum diameter of the wire so that stress in the wire does not exceed 100 N/mm2 is :

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion