Curioustab

Home » Civil Engineering » Theory of Structures

The ratio of moments of inertia of a triangular section about its base and about a centroidal axis parallel to its base, is

1.0
1.5
2.0
2.5
3.0

Correct Answer: 3.0

← Previous Question Next Question→

More Questions from Theory of Structures

A rectangular column shown in the given figure carries a load P having eccentricities ex and ev along X and Y axes. The stress at any point (x, y) is
A bar l metre long and having its area of cross-section A, is subjected to a gradually applied tensile load W. The strain energy stored in the bar is
Pick up the correct statement from the following:
A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that of brass bar is 3000 mm2. These are subjected to a compressive load 100,000 N. If Eb = 0.2 MN/mm2 and Eb = 0.1 MN/mm2, the stresses developed are:
The area of the core of a column of cross sectional area A, is
The maximum B.M. due to an isolated load in a three hinged parabolic arch, (span l, rise h) having one of its hinges at the crown, occurs on either side of the crown at a distance
The vertical reaction for the arch is
For permissible shear stress fs, the torque transmitted by a thin tube of mean diameter D and wall thickness t, is
If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit length over the entire span,
A bar of square section of area a2 is held such that its one of its diameters is vertical. The maximum shear stress will develop at a depth h where h is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion