Curioustab

Home » Civil Engineering » Theory of Structures

A bar of square section of area a2 is held such that its one of its diameters is vertical. The maximum shear stress will develop at a depth h where h is

Correct Answer:

← Previous Question Next Question→

More Questions from Theory of Structures

A steel bar 5 m x 50 mm is loaded with 250, 000 N. If the modulus of elasticity of the material is 0.2 MN/mm2 and Poisson's ratio is 0.25, the change in the volume of the bar is :
A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If αsteel = 0.000012/C°, Esteel = 0.2 MN/mm2, the tensile force developed at a temperature of 50°C, is
is the equation of Euler's crippling load, if
The degree of indeterminacy of the frame in the given figure, is
A simply supported beam carries a varying load from zero at one end and w at the other end. If the length of the beam is a, the shear force will be zero at a distance x from least loaded point where x is
The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with a uniformly distributed load l t per horizontal length, is (where Ic is the M.I. at the crown, which varies as the slope of the arch).
The ratio of lateral strain to axial strain of a homogeneous material, is known
A square column carries a load P at the centroid of one of the quarters of the square. If a is the side of the main square, the combined bending stress will be
The greatest load which a spring can carry without getting permanently distorted, is called
Co-efficient of wind resistance of a circular surface, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion