Curioustab

Home » Civil Engineering » Surveying

If the radius of a simple curve is 600 m, the maximum length of the chord for calculating offsets, is taken

10 m
15 m
20 m
25 m
30 m.

Correct Answer: 30 m.

← Previous Question Next Question→

More Questions from Surveying

Ranging in chain survey means
In levelling operation,
While measuring with a metallic tape of 30 m length pull should be applied
To set out a parallel from a given inccessible point to a given line AB, the following observations and made Distance AB and angle PAM = a and angle PBA = b are measured where Mis a point on the line BA produced. The perpendicular to the desired parallel line from A and B are :
The bearing of AB is 190° and that of CB is 260° 30'. The included angle ABC, is
The ratio of the radius and apex distance of a curve deflecting through Δ°, is
Surveys which are carried out to depict mountains, rivers, water bodies, wooded areas and other cultural details, are known as
The ratio of the distances at which a stated length can be distinguished by the telescope and the human eye, respectively, is called
A lemniscate curve between the tangents will be transitional throughout if the polar deflection angle of its apex, is
The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion