Curioustab

Home » Civil Engineering » Surveying

In horizontal angles, the error due to imperfect levelling of the plate bubble is

large when sights are nearly level
large for long sights
less for steeply inclined sights
large for steeply inclined sights.

Correct Answer: large for steeply inclined sights.

← Previous Question Next Question→

More Questions from Surveying

The slope correction for a 3° slope for a length of 100 m, is
If vertical angles of inclined sights do not exceed 10° and non-verticality of the staff remains within 1°, stadia system of tacheometric observations are made on
The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as
While surveying a plot of land by plane tabling, the field observations
A dumpy level was set up at mid-point between pegs A and B, 80 m apart and the staff readings were 1.32 and 1.56. When the level was set up at a point 10 m from A on BA produced, the staff readings obtained at A and B were 1.11 and 1.39. The correct staff reading from this set up at S should be
In a precision traverse, included angles are measured by setting the vernier
Pick up the correct statement from the following :
The rise and fall method of reduction of levels, provides a check on
An angles of 45° with a chain line may be set out with
In chain surveying, perpendiculars to the chain line, are set out by

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion