Curioustab

Home » Civil Engineering » Surveying

On a diagonal scale, it is possible to read up to

one dimension
two dimensions
three dimensions
four dimensions.

Correct Answer: three dimensions

← Previous Question Next Question→

More Questions from Surveying

Cross hairs in surveying telescopes, are fitted
Pick up the correct specification of Ramsden eyepiece from the following :
The systematic errors which persist and have regular effects in the performance of a survey operation, are due to
A dumpy level is set up with its eye-piece vertically over a peg A. The height from the top of peg A to the centre of the eye-piece is 1.540 m and the reading on peg B is 0.705 m. The level is then setup over B. The height of the eye-piece above peg B is 1.490 m and a reading on A is 2.195 m. The difference in level between A and B is
The area of a plane triangle ABC, having its base AC and perpendicular height h, is
A relatively fixed point of known elevation above datum, is called
Geodetic surveying is undertaken
In levelling operation
The conventional sign shown in below figure represents a
A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff readings at A and B were 1.22 and 1.06. With the level set up a A, the readings at A and B were 1.55 and 1.37. The collimation error per 100 m length of sight is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion