Curioustab

Home » Civil Engineering » Surveying

Cross hairs in surveying telescopes, are fitted

in the objective glass
at the centre of the telescope
at the optical centre of the eye piece
in front of the eye piece.

Correct Answer: in front of the eye piece.

← Previous Question Next Question→

More Questions from Surveying

Pick up the correct specification of Ramsden eyepiece from the following :
The systematic errors which persist and have regular effects in the performance of a survey operation, are due to
A dumpy level is set up with its eye-piece vertically over a peg A. The height from the top of peg A to the centre of the eye-piece is 1.540 m and the reading on peg B is 0.705 m. The level is then setup over B. The height of the eye-piece above peg B is 1.490 m and a reading on A is 2.195 m. The difference in level between A and B is
The area of a plane triangle ABC, having its base AC and perpendicular height h, is
A relatively fixed point of known elevation above datum, is called
Geodetic surveying is undertaken
In levelling operation
The conventional sign shown in below figure represents a
A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff readings at A and B were 1.22 and 1.06. With the level set up a A, the readings at A and B were 1.55 and 1.37. The collimation error per 100 m length of sight is
Deviation of the actual road gradient from the proposed contou'r gradient up hill side, involves

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion