Curioustab

Home » Civil Engineering » Structural Design Specifications

In the formula a + bk for the calculation of the net effective section of single tee in tension connected by flange to the same side of the same side of the gusset, the value of 'k' is taken

Correct Answer:

← Previous Question Next Question→

More Questions from Structural Design Specifications

Pick up the correct statement from the following:
If b is actual width of a flange, Dt is the thickness of the flange, bω is the breath of the web, lo is the distance between the points of zero moments in a beam, the effective width of the flange, is
All reinforcement should be free from
To achieve uniform colour and consistency of the concrete by using ordinary Portland cement, the mixing time may be
If the main reinforcement of the slab is parallel to a T-beam, the transverse reinforcement at mid span of the slab is provided at least ......of main reinforcement
For all practical purposes, the modulus of elasticity of steel is assumed
For spans upto 10 m, the safe span to depth ratio for
The angle of inclination of the lacing bars with axis of the member is kept between
If fck is characteristic compressive strength of concrete, the flexural and split tensile strength fcr = afck N/mm2 where the value of a is
The minimum area of cross section of reinforcement in either direction of a slab should not be less than ...... of the slab cross section

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion