Curioustab

Home » Civil Engineering » Structural Design Specifications

The cover to the main reinforced may be reduced up to one third of the specified cover but not less than

5 mm
7 mm
10 mm
15 mm

Correct Answer: 5 mm

← Previous Question Next Question→

More Questions from Structural Design Specifications

For the stability of a structural part, the weight or anchorage should be
The grade of plain concrete to be used in sea water or structures exposed to sea water, should be
In adverse circumtances, the reinforced concrete member immersed in sea water or subjected to sea spray, the maximum permissible cover for the reinforcing bars, should not exceed
Pick up the incorrect statement from the following:
The over all depth of a solid slab is 20 cm and effective depth is 15 cm. The horizontal distance between parallel main reinforcement should not be more than
The slenderness ratio of single angle discontinuous struts conmected by a single rivet or bolt, shall not exceed
If l is the effective span in metres and D is overall depth of the section in mm, the structure may be accepted after 24 hour load test, provided the maximum deflection in mm is less than
The reinforcing bars in beams are not bundled in contact if the diameter of the bars, exceeds
The ratio of minimum compressive strength on 15 cm cubes prepared with the concrete of M 20 grade and M 40 grade, at 7 days should be at least
Moist curing of the exposed surfaces of concrete is done at least for

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion