Curioustab

Home » Civil Engineering » Strength of Materials

A reinforced concrete beam is assumed to be made of

homogeneous material
heterogeneous material
isotropic material
none of these.

Correct Answer: heterogeneous material

← Previous Question Next Question→

More Questions from Strength of Materials

The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is
For a simply supported beam with a central load, the bending moment is
For a given material Young's modulus is 200 GN/m2 and modulus of rigidity is 80 GN/m2. The value of Poisson's ratio is
A triangular section having base b, height h, is placed with its base horizontal. If the shear stress at a depth y from top is q, the maximum shear stress is
As compared to uniaxial tension or compression, the strain energy stored in bending is only
A simply supported beam of span L carries a concentrated load W at its mid-span. The maximum bending moment M is
The radius of gyration of a rectangular section is not proportional to
A rectangular beam 20 cm wide is subjected to a maximum shearing force of 10, 000 kg, the corresponding maximum shearing stress being 30 kg/cm2. The depth of the beam is
A closely coiled helical spring of radius R, contains n turns and is subjected to an axial load W. If the radius of the coil wire is r and modulus of rigidity of the coil material is C, the stress developed in the helical spring is
The shear stress at any section of a shaft is maximum

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion