A simply supported beam of span L carries a concentrated load W at its mid-span. The maximum bending moment M is

More Questions from Strength of Materials

• The radius of gyration of a rectangular section is not proportional to
• A rectangular beam 20 cm wide is subjected to a maximum shearing force of 10, 000 kg, the corresponding maximum shearing stress being 30 kg/cm2. The depth of the beam is
• A closely coiled helical spring of radius R, contains n turns and is subjected to an axial load W. If the radius of the coil wire is r and modulus of rigidity of the coil material is C, the stress developed in the helical spring is
• The shear stress at any section of a shaft is maximum
• The shape of the bending moment diagram over the length of a beam, carrying a uniformly distributed load is always
• If the rivets in adjacent rows are staggered and outermost row has only one rivet, the arrangement of the rivets, is called
• When loads are applied proportionately to a frame structure containing its members in one plane, the structure is called
• The range within which a load can be applied on a rectangular column, to avoid any tensile stress, is
• For a simply supported beam of length L, the bending moment M is described as M = a (x - x3/L2), 0 ≤ x < L; where a is a constant. The shear force will be zero at
• The region of the cross-section of a column in which compressive load may be applied without producing any tensile stress, is known as the core of the cross-section. In circular columns the radius of the core, is

Discussion & Comments