Curioustab

Home » Civil Engineering » Strength of Materials

The law which states, "within elastic limits strain produced is proportional to the stress producing it", is known as

Bernoulli's law
Stress law
Hooke's law
Poisson's law
none of these.

Correct Answer: Hooke's law

← Previous Question Next Question→

More Questions from Strength of Materials

If a member carries a tensile force P on its area of cross-section A, the normal stress introduced on an inclined plane making an angle θ with its transverse plane, is
The reaction at the supports will be vertical to the plane of the support if the frame structure rests on
A simply supported wooden beam 150 cm long and having a cross section 16 cm x 24 cm carries a concentrated load, at the centre. If the permissible stress ft = 75 kg/cm2 and fs = 10 kg/cm2 the safe load is
Stress in members of statically determinate simple frames, can be determined by
The nature of the stress in horizontal members of the truss shown in below figure may be
If the normal cross-section A of a member is subjected to tensile force P, the resulting normal stress in an oblique plane inclined at angle θ to transverse plane will be
In a bar of large length when held vertically and subjected to a load at its lower end, its own-weight produces additional stress. The maximum stress will be
A cylinder is said to be thin if the ratio of its thickness and diameter, is less than
Stress in a beam due to simple bending, is
A cantilever beam rectangular in cross-section is subjected to an isolated load at its free end. If the width of the beam is doubled, the deflection of the free end will be changed in the ratio of

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion