Curioustab

Home » Civil Engineering » Strength of Materials

If Z and I are the section modulus and moment of inertia of the section, the shear force F and bending moment M at a section are related by

Correct Answer:

← Previous Question Next Question→

More Questions from Strength of Materials

The bending moment at C of a portal frame shown in below figure is
Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose
The section modulus of a rectangular section is proportional to
The maximum load to which a fillet joint of length L can be subjected to, is
A rectangular log of wood is floating in water with a load of 100 N at its centre. The maximum shear force in the wooden log is
For a beam of uniform strength keeping its depth constant, the width will vary in proportion to
The width of a beam of uniform strength having a constant depth d length L, simply supported at the ends with a central load W is
The ratio of the maximum deflection of a cantilever beam with an isolated load at its free end and with a uniformly distributed load over its entire length, is
For a cantilever with a uniformly distributed load W over its entire length L, the maximum bending moment is
The width b and depth d of a beam cut from a wooden cylindrical log of 100 cm diameter for maximum strength are :

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion