Curioustab

Home » Civil Engineering » Strength of Materials

Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose

one end is fixed and other end is hinged
both ends are hinged or pin jointed
one end is fixed and the other end entirely free
both the ends are fixed
none of the these.

Correct Answer: both the ends are fixed

← Previous Question Next Question→

More Questions from Strength of Materials

The section modulus of a rectangular section is proportional to
The maximum load to which a fillet joint of length L can be subjected to, is
A rectangular log of wood is floating in water with a load of 100 N at its centre. The maximum shear force in the wooden log is
For a beam of uniform strength keeping its depth constant, the width will vary in proportion to
The width of a beam of uniform strength having a constant depth d length L, simply supported at the ends with a central load W is
The ratio of the maximum deflection of a cantilever beam with an isolated load at its free end and with a uniformly distributed load over its entire length, is
For a cantilever with a uniformly distributed load W over its entire length L, the maximum bending moment is
The width b and depth d of a beam cut from a wooden cylindrical log of 100 cm diameter for maximum strength are :
The stress necessary to initiate yielding, is considerably
The maximum deflection of

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion