Curioustab

Home » Civil Engineering » Strength of Materials

If two forces acting at a joint are not along the straight line, then for the equilibrium of the joint

one of the forces must be zero
each force must be zero
forces must be equal and of the same sign
forces must be equal in magnitude but opposite in sign.

Correct Answer: each force must be zero

← Previous Question Next Question→

More Questions from Strength of Materials

The ratio of the moment of inertia of a circular plate and that of a square plate for equal depth, is
In case of an eccentric loading on a bracket subjected to moment M, the tangential force developed in any rivet, at right angles to its radius vector r is
If a shaft is rotating N revolutions per minute with an applied torque T kg-m, the horse power being transmitted by the shaft, is
The force in member U2L2 of the truss shown in below figure, is
The ratio of strengths of solid to hollow shafts, both having outside diameter D and hollow having inside diameter D/2, in torsion, is
The shape of the bending moment diagram over the length of a beam, having no external load, is always
If n is the ratio of internal and external diameters of a hollow shaft, the ratio of the weight of the hollow shaft and that of solid shaft of same strength, will be
In the cantilever truss as shown in below figure, the horizontal component of the reaction at A, is
If a rectangular beam measuring 10 x 18 x 400 cm carries a unformly distributed load such that the bending stress developed is 100 kg/cm2. The intensity of the load per metre length, is
A beam of length L is pinned at both ends and is subjected to a concentrated bending couple of moment M at its centre. The maximum bending moment in the beam is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion