Curioustab

Home » Civil Engineering » Strength of Materials

In case of an eccentric loading on a bracket subjected to moment M, the tangential force developed in any rivet, at right angles to its radius vector r is

Correct Answer:

← Previous Question Next Question→

More Questions from Strength of Materials

If a shaft is rotating N revolutions per minute with an applied torque T kg-m, the horse power being transmitted by the shaft, is
The force in member U2L2 of the truss shown in below figure, is
The ratio of strengths of solid to hollow shafts, both having outside diameter D and hollow having inside diameter D/2, in torsion, is
The shape of the bending moment diagram over the length of a beam, having no external load, is always
If n is the ratio of internal and external diameters of a hollow shaft, the ratio of the weight of the hollow shaft and that of solid shaft of same strength, will be
In the cantilever truss as shown in below figure, the horizontal component of the reaction at A, is
If a rectangular beam measuring 10 x 18 x 400 cm carries a unformly distributed load such that the bending stress developed is 100 kg/cm2. The intensity of the load per metre length, is
A beam of length L is pinned at both ends and is subjected to a concentrated bending couple of moment M at its centre. The maximum bending moment in the beam is
If the shear force along a section of a beam is zero, the bending moment at the section is
A uniform girder simply supported at its ends is subjected to a uniformly distributed load over its entire length and is propped at the centre so as to neutralise the deflection. The net B.M. at the centre will be

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion