Curioustab

Home » Civil Engineering » Strength of Materials

To ascertain the maximum permissible eccentricity of loads on circular columns, the rule generally followed, is

middle half rule of columns
middle third rule of columns
middle fourth rule of columns
none of these.

Correct Answer: middle fourth rule of columns

← Previous Question Next Question→

More Questions from Strength of Materials

The distance between the centres of adjacent rivets in the same row, is called
If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an axial pull of 3000 kg, the stress developed, is
As the elastic limit reaches, tensile strain
Every material obeys the Hooke's law within its
The bending moment is maximum on a section where shearing force
If the width of a simply supported beam carrying an isolated load at its centre is doubled, the deflection of the beam at the centre is changed by
If the stress produced by a prismatic bar is equal to the working stress, the area of the cross-section of the prismatic bar, becomes
The following assumption is not true in the theory of pure torsion :
Pick up the correct statement from the following :
If the beam is supported so that there are only three unknown reactive elements at the supports. These can be determined by using the following fundamental equation of statics

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion