A very comfortable type of stairs is

More Questions from RCC Structures Design

• The modular ratio m of a concrete whose permissible compressive stress is C, may be obtained from the equation.
• If permissible compressive stress in concrete is 50 kg/cm2, tensile stress in steel is 1400 kg/cm2 and modular ratio is 18, the depth d of the beam, is
• The pitch of the main bars in a simply supported slab, should not exceed its effective depth by
• P is the prestressed force applied to tendon of a rectangular prestressed beam whose area of cross section is A and sectional modulus is Z. The minimum stress f on the beam subjected to a maximum bending moment M is
• The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stressess simultaneously, is called
• The maximum permissible size of aggregates to be used in casting the ribs of a slab, is
• In a simply supported slab, alternate bars are curtailed at
• The diameter of main bars in R.C.C. columns, shall not be less than
• In the zone of R.C.C. beam where shear stress is less than 5 kg/cm2, nominal reinforcement is provided at a pitch of
• The zone in which transverse bending is likely to occur may be obtained by drawing a line from the faces of the column making an angle θ° with horizontal where θ° is

Discussion & Comments