Curioustab

Home » Civil Engineering » RCC Structures Design

The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is

20 cm
25 cm
30 cm
35 cm
40 cm

Correct Answer: 30 cm

← Previous Question Next Question→

More Questions from RCC Structures Design

If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is
The breadth of a ribbed slab containing two bars must be between
If l1 and l2 are the lengths of long and short spans of a two way slab simply supported on four edges and carrying a load w per unit area, the ratio of the loads split into w1 and w2 acting on strips parallel to l2 and l1 is
If the modular ratio is m, steel ratio is r and overall depth of a beam is d, the depth of the critical neutral axis of the beam, is
A per IS : 1343, total shrinkage for a pretensioned beam, is
The Young's modulus of elasticity of steel, is
The design of heel slab of a retaining wall, is based on the maximum bending moment due to:
On an absolutely rigid foundation base, the pressure will
If W is weight of a retaining wall and P is the horizontal earth pressure, the factor of safety against sliding, is
Total pressure on the vertical face of a retaining wall of height h per unit run exerted by the retained earth weighing w per unit volume, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion