Curioustab

Home » Civil Engineering » RCC Structures Design

If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is

zero
none of these.

Correct Answer:

← Previous Question Next Question→

More Questions from RCC Structures Design

As per I.S. 456 - 1978, the pH value of water shall be
The percentage of minimum reinforcement of the gross sectional area in slabs, is
To have pressure wholly compressive under the base of a retaining wall of width b, the resultant of the weight of the wall and the pressure exerted by the retained, earth should have eccentricity not more than
In a prestressed beam carrying an external load W with a bent tendon is having angle of inclination θ and prestressed load P. The net downward load at the centre is
Pick up the correct statement from the following:
The maximum area of tension reinforcement in beams shall not exceed
If d and n are the effective depth and depth of the neutral axis respectively of a singly reinforced beam, the lever arm of the beam, is
The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2, safe shear stress 5 kg/cm2 and B.M. 24 mt,
If R and T are rise and tread of a stair spanning horizontally, the steps are supported by a wall on one side and by a stringer beam on the other side, the steps are designed as beams of width
A prestressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion