Curioustab

Home » Civil Engineering » RCC Structures Design

If Md and Mt are the maximum bending moments due to dead load and live load respectively and F is the total effective pressure, for a balanced design of a prestreseed concrete beam of steel, is

Correct Answer:

← Previous Question Next Question→

More Questions from RCC Structures Design

In a prestressed member it is advisable to use
For a ribbed slab
If the neutral axis of a T-beam is below the slab, the relationship between the flange width B, depth of neutral axis n, thickness of the slab ds, effective depth of the beam d, gross area of tensile steel At and the modular ratio m may be stated as
If A is the sectional area of a prestressed rectangular beam provided with a tendon prestressed by a force P through its centroidal longitudinal axis, the compressive stress in concrete, is
A pre-stressed concrete member is preferred because
The maximum ratio of span to depth of a slab simply supported and spanning in one direction, is
In a slab, the pitch of the main reinforcement should not exceed its effective depth
An R.C.C. column is treated as short column if its slenderness ratio is less than
After prestressing process is completed, a loss of stress is due to
If Ac, Asc and A are areas of concrete, longitudinal steel and section of a R.C.C. column and m and σc are the modular ratio and maximum stress in the configuration of concrete, the strength of column is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion