Curioustab

Home » Civil Engineering » RCC Structures Design

If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is

12 mm
13 mm
14 mm
15 mm
16 mm

Correct Answer: 16 mm

← Previous Question Next Question→

More Questions from RCC Structures Design

The breadth of a ribbed slab containing two bars must be between
If l1 and l2 are the lengths of long and short spans of a two way slab simply supported on four edges and carrying a load w per unit area, the ratio of the loads split into w1 and w2 acting on strips parallel to l2 and l1 is
If the modular ratio is m, steel ratio is r and overall depth of a beam is d, the depth of the critical neutral axis of the beam, is
A per IS : 1343, total shrinkage for a pretensioned beam, is
The Young's modulus of elasticity of steel, is
The design of heel slab of a retaining wall, is based on the maximum bending moment due to:
On an absolutely rigid foundation base, the pressure will
If W is weight of a retaining wall and P is the horizontal earth pressure, the factor of safety against sliding, is
Total pressure on the vertical face of a retaining wall of height h per unit run exerted by the retained earth weighing w per unit volume, is
Side face reinforcement shall be provided in the beam when depth of the web in a beam exceeds

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion