If d is the diameter of a bar, ft is allowable tensile stress and fb, is allowable bond stress, the bond length is given by

More Questions from RCC Structures Design

• If H is the overall height of a retaining wall retaining a surcharge, the width of the base slab usually provided, is
• If the maximum bending moment of a simply supported slab is M Kg.cm, the effective depth of the slab is (where Q is M.R. factor)
• If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is
• A pre-stressed concrete member
• In a singly reinforced beam, if the permissible stress in concrete reaches earlier than that in steel, the beam section is called
• In a combined footing if shear stress does not exceed 5 kg/cm2, the nominal stirrups provided are
• An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is
• Minimum spacing between horizontal parallel reinforcement of different sizes, should not be less than
• If diameter of a reinforcement bar is d, the anchorge value of the hook is
• The angle of internal friction of soil mass is the angle whose

Discussion & Comments