Curioustab

Home » Civil Engineering » Railways

Pick up the incorrect statement from the following. Required tilt of 1 in 20 is provided

to the tops of rails
at rail seats in bearing plates
at rail seats in chairs
at rail seats in metal sleepers.

Correct Answer: to the tops of rails

← Previous Question Next Question→

More Questions from Railways

To avoid the damage of nose of crossing, the wing rails are ramped so that nose of crossing remains at a lower level by
Sand may be used as ballast for
If G is gauge distance and a is crossing, the distance between the nose of acute crossing and nose of obtuse crossing of a rail diamond, measured along the rail not forming the diamond, is
In a railway track, permissible gauge with tolerance under loaded condition, is
On Indian Railways, angle of crossing between gauge faces of Vee, is generally calculated by
If w is width of sleepers, s is sleeper spacing and d is depth of ballast then
Weight and cross section of the rails are decided on
For even distribution of load through ballast, load dispersal is assumed as
Check rails are provided on inner side of inner rails if sharpness of a B.G. curve, is more than
On Indian Railways, the approximate weight of a rail section is determined from the formula

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion