Curioustab

Home » Civil Engineering » GATE Exam Questions

Water flows at a depth of 0.1 m with a velocity of 6 m/s in a rectangular channel. The alternate dpeth is

0.30 m
0.40 m
0.86 m
0.81 m

Correct Answer: 0.81 m

← Previous Question Next Question→

More Questions from GATE Exam Questions

The shape of the STOP sign according to IRC:67-2001 is
A soil mass has coefficients of horizontal and vertical permeability as 9 x 10-7 cm/s and 4 x 10-7 cm/s, respectively. The transformed coefficient of permeability of an equivalent isotropic soil mass is
The comparison between pumps operating in series and in parallel is :
Bituminous materials are used in highway construction primarily because of their :
If the pump head is 75 m, discharge is 0.464 m3/s and the motor speed is 1440 rpm at rated condition, the specific speed of the pump is about
In cohesive soils the depth of tension crack (Zcr) is likely to be
The parameters in Horton's infiltration equation are given as, fo = 7.62 cm/hour, fc = 1.34 cm/hour and k = 4.182/hour. For assumed continuous ponding the cumulative infiltration at the end of 2 hours is
At the same mean velocity, the ratio of head loss per unit length for a sewer pipe flowing full to that for the same pipe flowing half full would be :
The temporary hardness of water, is caused by:
The expression for the specific speed of a pump :

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion