Curioustab
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Home
»
Civil Engineering
»
GATE Exam Questions
The effective width of a reinforced concrete T beam flange under compression, according to IS : 456-1978, given I0 is the distance between the adjacent zero moment points, b is the breadth of the rib and D is the thickness of the flange, is
I0 + 6D
Correct Answer:
← Previous Question
Next Question→
More Questions from
GATE Exam Questions
Factor of safety adopted by IS : 800 - 1984 while arriving at the permissible stress in axial compression, is :
In highway pavements emulsions are mainly used in :
A river 5 m deep consists of a sand bed with saturated unit weight of 20 kN/m3 . vw = 9.81 kN/m3. The effective vertical stress at 5 m from the top of sand bed is
Storage coefficient of a compressible confined aquifer is a function of
According to Darcy's law for flow through porous media, the velocity is proportional to
In a river, discharge is 173 m3/s; water surface slope is 1 in 6000; and stage at the gauge station is 10.0 m. If during a flood, the stage at the gauge station is same and the water surface slope is 1 in 2000, the flood discharge in m3/s, is approximately
Generally the maximum deflection/span ratio of a steel member should not exceed
A pre-tensioned concrete member of section 200 mm x 250 mm contains tendons of area 500 mm2 at centre of gravity of the section. The prestress in the tendons is 1000 N/mm2. Assuming modular ratio as 10, the stress (N/mm2) in concrete is
The water surface profile resulting from flow underneath the gate in the below figure is :
A stable channel is to be designed for a discharge of Q m3 /s with silt factor f as per Lacey's method. The mean flow velocity (m/s) in the channel is obtained by
Discussion & Comments
No comments yet. Be the first to comment!
Name:
Comment:
Post Comment
Join Discussion
Discussion & Comments