Generally the maximum deflection/span ratio of a steel member should not exceed

More Questions from GATE Exam Questions

• A pre-tensioned concrete member of section 200 mm x 250 mm contains tendons of area 500 mm2 at centre of gravity of the section. The prestress in the tendons is 1000 N/mm2. Assuming modular ratio as 10, the stress (N/mm2) in concrete is
• The water surface profile resulting from flow underneath the gate in the below figure is :
• A stable channel is to be designed for a discharge of Q m3 /s with silt factor f as per Lacey's method. The mean flow velocity (m/s) in the channel is obtained by
• Biochemical oxygen demand (BOD) of waste water is a measure of
• While deriving an expression for loss of head due to a sudden expansion in a pipe, in addition to the continuity and impulse-momentum equations, one of the following assumptions is made :
• A light house of 120 m height is just visible above the horizon from a ship. The correct distance (m) between the ship and the light house considering combined correction for curvature and refraction, is
• The most important water quality parameter for domestic use of water is
• For the structure shown below, the vertical deflection at point A is given by
• The unit weight of a soil at zero air voids depends on :
• Base course is used in rigid pavements for

Discussion & Comments