Curioustab
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Home
»
Civil Engineering
»
GATE Exam Questions
Allowable average shear stress in an un-stiffened web for beams made of steel of grade 250 N/mm2 is :
250 N/mm2
165 N/mm2
150 N/mm2
100 N/mm2
Correct Answer:
100 N/mm2
← Previous Question
Next Question→
More Questions from
GATE Exam Questions
A two lane single carriage-way is to be designed for a design life period of 15 years. Total two-way traffic intensity in the year of completion of construction is expected to be 2000 commercial vehicles per day. Vehicle damage factor = 3.0, Lane distribution factor = 0.75. Assuming an annual rate of traffic growth as 7.5%, the design traffic expressed as cumulative number of standard axles, is
A mild steel specimen is under uni-axial tensile stress. Young's modulus and yield stress for mild steel are 2 x 105 MPa and 250 MPa respectively. The maximum amount of strain energy per unit volume that can be stored in this speciment without permanent set, is
When a retaining wall moves away from the backfill, the pressure exerted on the wall is termed as
A propped cantilever beam in shown in the below figure. The plastic moment capacity of the beam is M0. The collapse load P is
The toughness index of clayey soils is given by
On an immersed body in a flowing fluid the lift force is :
Two footings, one circular and the other square, are founded on the surface of a purely cohesionless soil. The diameter of the circular footing is same as that of the side of the square footing. The ratio of their ultimate bearing capcities is
The nature of contact pressure distribution under a rigid footing resting on a sandy soil and subjected to uniformly distributed load is as shown in :
Rivets and bolts subjected to both shear stress (τvf , cal) and axial tensile stress (σtf , cal) shall be so proportioned that the stresses do not exceed the respective allowable stresses τvf and σtf and the value of exceed does not exceed
Compaction by vibratory roller is the best method of compaction in case of
Discussion & Comments
No comments yet. Be the first to comment!
Name:
Comment:
Post Comment
Join Discussion
Discussion & Comments