Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

Normally, the ratio of the total riser area to the tower cross sectional area (for bubble cap towers of diameter more than 3 ft) is around

0.4-0.6
0.35-0.75
0.1-0.2
0.55-0.85

Correct Answer: 0.1-0.2

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

The type of stress developed in a metallic bar on subjecting it to a change in temperature without allowing it to be deformed is __________ stress.
For a given design of bubble cap, the number of bubble caps to be used per tray is set by the
Smoker's equation for the calculation of number of equilibrium stages in a continuous binary distillation column is used, when the
Corrosion allowance in the design of pressure vessel/chemical equipment is not necessary, if
Oxygen carrying pipelines in chemical industries are coloured with __________ colour.
Which of the following lengths of heat exchanger tubes are normally not used in practice?
Height of the flights in the rotary drier is in the range of
In packed absorption tower, onset of flooding usually occurs at a pressure drop of about __________ mm of water column per metre height of packing.
In a distillation column, minimum clearance to be maintained betweeen the overflow weir and the last row of the bubble caps is __________ cms.
Reflux ratio variation in a distillation column is between

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion