Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

For a given design of bubble cap, the number of bubble caps to be used per tray is set by the

allowable gas velocity through the slots.
plate spacing.
diameter of the column.
all (a), (b) and (c).

Correct Answer: allowable gas velocity through the slots.

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

Smoker's equation for the calculation of number of equilibrium stages in a continuous binary distillation column is used, when the
Corrosion allowance in the design of pressure vessel/chemical equipment is not necessary, if
Oxygen carrying pipelines in chemical industries are coloured with __________ colour.
Which of the following lengths of heat exchanger tubes are normally not used in practice?
Height of the flights in the rotary drier is in the range of
In packed absorption tower, onset of flooding usually occurs at a pressure drop of about __________ mm of water column per metre height of packing.
In a distillation column, minimum clearance to be maintained betweeen the overflow weir and the last row of the bubble caps is __________ cms.
Reflux ratio variation in a distillation column is between
Equivalent diameter for heat transfer calculation for a duct of square cross-section having each side as 'd' will be
In condenser, the cooling water is passed in the tube side in a pass arrangement, because

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion