Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

Corrosion allowance in the design of pressure vessel/chemical equipment is not necessary, if

plain carbon steel and cast iron parts are used.
wall thickness is > 30 mm.
material of construction is high alloy steel.
both(b) & (c).

Correct Answer: both(b) & (c).

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

Oxygen carrying pipelines in chemical industries are coloured with __________ colour.
Which of the following lengths of heat exchanger tubes are normally not used in practice?
Height of the flights in the rotary drier is in the range of
In packed absorption tower, onset of flooding usually occurs at a pressure drop of about __________ mm of water column per metre height of packing.
In a distillation column, minimum clearance to be maintained betweeen the overflow weir and the last row of the bubble caps is __________ cms.
Reflux ratio variation in a distillation column is between
Equivalent diameter for heat transfer calculation for a duct of square cross-section having each side as 'd' will be
In condenser, the cooling water is passed in the tube side in a pass arrangement, because
Longitundinal stress induced in a thin walled cylindrical storage vessel is
A pipe is generally made of circular cross-section, because a circular cross-section has the

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion