Curioustab
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Home
»
Chemical Engineering
»
Process Equipment and Plant Design
LMTD correction factor is used in heat exchanger design for
double pipe heat exchanger.
multipass shell and tube heat exchanger.
fouling fluids.
counter flow of hot and cold fluids.
Correct Answer:
multipass shell and tube heat exchanger.
← Previous Question
Next Question→
More Questions from
Process Equipment and Plant Design
With increase in the reflux ratio for a fixed production from a continuous binary distillation column, the __________ decreases.
The slope of operating line in the rectifying section of a distillation column is unity, if the reflux ratio is
Vertical vessels are not supported by
Minimum recommended baffle spacing in a shell and tube heat exchanger is about (where, D = shell diameter )
Thickness of the frame of a plate and frame filter as compared to that of plates is
In a __________ rivetted joint, the rivets in the various rows are opposite to each other.
Height equivalent to a theoretical plate (HETP) is the height of packing that will give the same separation as one theoretical plate in gas-liquid mass transfer operations like distillation, absorption/stripping and humidification/dehumidification. HETP which is experimentally determined, depends upon the
Pick out the wrong statement:
Speed of industrial paddle agitator ranges from __________ rpm.
Needle valves are generally not used for
Discussion & Comments
No comments yet. Be the first to comment!
Name:
Comment:
Post Comment
Join Discussion
Discussion & Comments