Vertical vessels are not supported by

More Questions from Process Equipment and Plant Design

• Minimum recommended baffle spacing in a shell and tube heat exchanger is about (where, D = shell diameter )
• Thickness of the frame of a plate and frame filter as compared to that of plates is
• In a __________ rivetted joint, the rivets in the various rows are opposite to each other.
• Height equivalent to a theoretical plate (HETP) is the height of packing that will give the same separation as one theoretical plate in gas-liquid mass transfer operations like distillation, absorption/stripping and humidification/dehumidification. HETP which is experimentally determined, depends upon the
• Pick out the wrong statement:
• Speed of industrial paddle agitator ranges from __________ rpm.
• Needle valves are generally not used for
• Saddle supports are used for supporting __________ vessels.
• Which of the following is used to set the diameter of the distillation column?
• The most common standard size of bubble caps used in industrial operation is

Discussion & Comments