Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

Speed of industrial paddle agitator ranges from __________ rpm.

1 to 5
20 to 100
500 to 750
1000 to 2000

Correct Answer: 20 to 100

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

Needle valves are generally not used for
Saddle supports are used for supporting __________ vessels.
Which of the following is used to set the diameter of the distillation column?
The most common standard size of bubble caps used in industrial operation is
With increase in pressure drop (for a given particle size), the dust collection efficiency of a cyclone separator will
The thickness of heat transfer plates used in the plate type heat exchanger ranges from __________ mm, pressed in a single piece provided with grooves & corrugations.
Cooling water fouling factors vary in the range of 0.001 to 0.003
Optimum reflux ratio in a continuous distillation column is determined by the
Multiple blade paddle agitator is used for mixing high viscosity liquids/paste in which the paddle diameter is commonly 0.8 times the tank diameter. However, the width of the blade is in the range of __________ times the paddle diameter.
Rivets are generally specified by the

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion