Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

for fully open gate valves would be

much more than that for fully open globe valves.
much less (say 2% than that for fully open globe valves).
around 7.
both (b) and (c).

Correct Answer: both (b) and (c).

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

Ponchon Savarit method is based on the use of enthalpy concentration diagram, which contains the bubble point curve (saturated liquid curve), dew point curve (saturated vapour curve) and equilibrium tie lines. As compared to McCabe-Thiele's method, this method
Generally, elliptical dished heads
A head comprises of straight flange section, corner torus, section and central dished section. Crown radius and knuckle radius in a head is related respectively to the
LMTD correction factor is used in heat exchanger design for
With increase in the reflux ratio for a fixed production from a continuous binary distillation column, the __________ decreases.
The slope of operating line in the rectifying section of a distillation column is unity, if the reflux ratio is
Vertical vessels are not supported by
Minimum recommended baffle spacing in a shell and tube heat exchanger is about (where, D = shell diameter )
Thickness of the frame of a plate and frame filter as compared to that of plates is
In a __________ rivetted joint, the rivets in the various rows are opposite to each other.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion