Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

Back-trapping in a distillation column results due to

low gas velocity.
high gas velocity.
excessive liquid gradient over the tray.
low reflux ratio.

Correct Answer: excessive liquid gradient over the tray.

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

Pick out the wrong statement about the design of seive plate column and the bubble cap column.
The wall thickness for a large high pressure pipeline is determined by the consideration of the
The shell side pressure drop in a shell and tube heat exchanger is maximum for __________ baffle.
Width and depth of grooves in the tube sheet holes normally are __________ inch respectively.
For pipe flows, head is proportional to __________ at constant capacity (where D = pipe diameter ).
For a cylinderical vessel of moderate height, the weld joint efficiency for joints parallel to the cylinderical axis is given as 1.0, while for joints along the girth (circumference) it is given as 0.8. In calculating the shell wall thickness using code formula for an internally pressurised cylinderical vessel, what value of weld joint efficiency should be used?
Normally, the plate thickness of the bottoms and roofs of vertically cylindrical storage vessels as compared to that of the cylindrical shell is
Diameter of bubble caps used in high pressure columns is __________ as compared to that used in identical vacuum columns.
In packed towers provided with pall rings liquid redistributors are positioned at heights of every 6 metres or 5-10 times the column diameter, whichever is less. Maximum size of the pall rings should not exceed __________ of the column diameter.
__________ of water makes it a widely used coolant in heat exchangers.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion