Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

Column support for the roof of cylindrical storage tank must be provided for

small diameter tanks.
large diameter tanks.
small diameter tall tanks.
all tanks irrespective of their heights and diameters.

Correct Answer: large diameter tanks.

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

Back-trapping in a distillation column results due to
Pick out the wrong statement about the design of seive plate column and the bubble cap column.
The wall thickness for a large high pressure pipeline is determined by the consideration of the
The shell side pressure drop in a shell and tube heat exchanger is maximum for __________ baffle.
Width and depth of grooves in the tube sheet holes normally are __________ inch respectively.
For pipe flows, head is proportional to __________ at constant capacity (where D = pipe diameter ).
For a cylinderical vessel of moderate height, the weld joint efficiency for joints parallel to the cylinderical axis is given as 1.0, while for joints along the girth (circumference) it is given as 0.8. In calculating the shell wall thickness using code formula for an internally pressurised cylinderical vessel, what value of weld joint efficiency should be used?
Normally, the plate thickness of the bottoms and roofs of vertically cylindrical storage vessels as compared to that of the cylindrical shell is
Diameter of bubble caps used in high pressure columns is __________ as compared to that used in identical vacuum columns.
In packed towers provided with pall rings liquid redistributors are positioned at heights of every 6 metres or 5-10 times the column diameter, whichever is less. Maximum size of the pall rings should not exceed __________ of the column diameter.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion