Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

The approximate liquid depth in an agitation tank is equal to (where, d = tank diameter)

0.5 d
0.75 d
d
2 d

Correct Answer: d

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

For given number of passes, pitch & tube diameter, the maximum number of tubes that can be accommodated in a shell of tripled inside diameter will be __________ times.
A binary liquid azeotropic mixture has boiling point lower than either of the components, when it shows __________ deviation from Raoult's Law.
Baffle width is normally taken as __________ times the tank diameter.
The equivalent diameter for fluid flow through a channel of constant non-circular cross section of area 'A' is given by (where, P = perimeter of the channel in contact with the fluid)
Larger depth of liquid on the trays of a distillation column
Pressure drop per tray in the atmospheric distillation column is about __________ psi.
The centre to centre distance between two consecutive baffles in a shell and tube heat exchanger is called the baffle pitch or baffle spacing, which is more than 1/5th the I.D. of the shell. Which of the following is not a function of the baffles?
If a single tube pass heat exchanger is converted to two passes; for the same flow rate, the pressure drop per unit length in tube side will __________ times.
In the downcomer of a distillation column, the minimum recommended residence time is about __________ seconds.
Bubble cap plate column is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion