Resistance of a gas in a vessel is given by (where, P = pressure, V = volume of the vessel, n = no. of moles of the gas, R = gas constant)

More Questions from Process Control and Instrumentation

• According to Bode stability criterian, a system is unstable, if the open loop frequency response exhibits an amplitude ratio exceeding unity at frequency for which phase lag is
• Flow rate of those fluids which are insensitive to changes in their density, viscosity or flow velocity profile can be best measured by a
• The fluid used in hydraulic controller is
• Feed forward controller accounts for the __________ changes.
• Pick out the most suitable instrument for measuring temperature in the range of-40 to 425°C.
• The __________ of a vapor pressure thermometer is a primary element.
• "A control system is unstable, if the open loop frequency response exhibits an amplitude ratio exceeding unity at the crossover frequency." This is __________ criterion.
• Measurement of pressure in ammonia reactor is done by
• A process is initially at steady state with its output y=l for an input u=l. The input is suddenly changed to 2 at time t=0. The output response is y(t)=1+2t. The transfer function of the process is
• What is the dynamic error in a critically damped second order instrument for a ramp input (At)?

Discussion & Comments